the complete solution.
Flexibility
- Customised system design from 160 - 320 mm
- Thermal bridge-free brackets, can be combined with MinTop adjustment screws
- Large network of SAGER partners
- Free choice of façade design
Productivity
From stocktaking to system delivery, the whole programme - use your time elsewhere.
Comfort
Security
Support of the execution by SAGER's technical support during the construction phase
FS-PRO
Bracket | thermal bridge-free
FS-PRO MinTop
Bracket | thermal bridge-free | combined with MinTop adjustment screws
FS-PRO Light
Bracket | thermal bridge-free
FS-PRO Compact
Bracket | thermal bridge-free
SAGER FS-PRO façade system
Thermal bridge-free bracket
| Consoles | Type FS-PRO Aluminium-fibreglass Thermal bridge-free 160 - 320 mm | ||||
|---|---|---|---|---|---|
| Insulation | SAGLAN (030) FA 50 λ 0.030 W/mK, 48 kg/m3 |
SAGLAN (032) FA 40 λ 0.032 W/mK, 38 kg/m3 |
SAGLAN (032) FA Light λ 0.032 W/mK, 30 kg/m3 |
||
| Façade membrane / wind seal | SAGER facade black Open façade < 50 mm Joint proportion 40% |
SAGER sky light anthracite Closed facade Joint proportion 0% |
|||
| Adhesive tape | SAGER black, 60 mm | SAGER blue, 60 mm | |||
| Fasteners Console | SAGER long shank dowel (masonry) 10 x 80 mm 1 piece / console |
SAGER concrete anchor 8 x 70 mm 1 piece / console |
|||
| Insulation fasteners | SAGER insulation holder for the 1st layer DH-one-piece 3 pcs. / m2 |
||||
| Battens | 60 x 60 mm | ||||
The SAGER FS-PRO façade system offers the optimum substructure solution for rear-ventilated façades.
The thermal bridge-free bracket serves as the basis for excellent U-values and is specially designed for timber construction. Thanks to the bracket head, a 60/60 mm timber batten can be used in the outer insulation layer. The façade membrane can be easily attached and the rear ventilation grid can be screwed in as normal.
The first insulation layer is fixed with the SAGER insulation holder. We recommend 5 insulation holders per square metre.
The second, outer insulation layer is always 60 mm thick and can simply be pressed between the 60/60 mm wooden battens. Based on the bracket division, the insulation can be cut to the required width ex works to reduce the time required and unnecessary residual material.
The SAGER sky light covering membrane is the ideal façade membrane for closed façade cladding.
The SAGER facade membrane facade, black and very UV-stable, can be used for open facade cladding with a maximum joint ratio of 40% and a maximum joint opening of 50 mm.
Both sheets are available in two widths, 1.5 m and 3.0 m. Thanks to the integrated self-adhesive strip, the overlaps can be glued quickly and easily.
| Consoles | Type FS-PRO Aluminium-fibreglass Thermal bridge-free 160 - 300 mm | ||||
|---|---|---|---|---|---|
| Adjusting screws | Adjusting screws MinTop with dowel 160 - 300 mm |
||||
| Insulation | SAGLAN (030) FA 50 λ 0.030 W/mK, 48 kg/m3 |
SAGLAN (032) FA 40 λ 0.032 W/mK, 38 kg/m3 |
SAGLAN (032) FA Light λ 0.032 W/mK, 30 kg/m3 |
||
| Façade membrane / wind seal | SAGER facade black Open façade < 50 mm Joint proportion 40% |
SAGER sky light anthracite Closed facade Joint proportion 0% |
|||
| Adhesive tape | SAGER black, 60 mm | SAGER blue, 60 mm | |||
| Fasteners Console | SAGER long shank dowel (masonry) 10 x 80 mm 1 piece / console |
SAGER concrete anchor 8 x 70 mm 1 piece / console |
|||
| Insulation fasteners | SAGER insulation holder DH-one-piece 3 pcs. / m2 |
||||
| Battens | 60 x 60 mm | ||||
The SAGER FS-PRO MinTop façade system is a substructure solution for rear-ventilated façades that combines the FS-PRO thermal bridge-free bracket with the MinTop adjusting screw.
The thermal bridge-free bracket serves as the basis for excellent U-values and is specially designed for timber construction. Thanks to the bracket head, one 60/60 mm timber batten can be used per storey. The façade membrane can be easily attached.
The rear ventilation slats are pre-assembled on the horizontal batten and statically screwed into the substrate with the MinTop screw. Thanks to the special thread of the MinTop adjusting screw, the rear ventilation battens can be easily aligned.
The insulation layer is fixed in place with SAGER insulation holders.
The SAGER sky light covering membrane is the ideal façade membrane for closed façade cladding.
The SAGER facade membrane facade, black and UV-stable, can be used for open facade cladding with a maximum 40% joint ratio and a maximum joint opening of 50 mm.
Both sheets are available in two widths, 1.5 m and 3.0 m. Thanks to the integrated self-adhesive strip, the overlaps can be glued quickly and easily.
SAGER FS-PRO Light façade system
Thermal bridge-free bracket
| Consoles | Type FS-PRO Light aluminium-fibreglass Thermal bridge-free 160 - 280 mm | ||||
|---|---|---|---|---|---|
| Insulation | SAGLAN (030) FA 50 λ 0.030 W/mK, 48 kg/m3 |
SAGLAN (032) FA 40 λ 0.032 W/mK, 38 kg/m3 |
SAGLAN (032) FA Light λ 0.032 W/mK, 30 kg/m3 |
||
| Façade membrane / wind seal | SAGER facade black Open façade < 50 mm Joint proportion 40% |
SAGER sky light anthracite Closed facade Joint percentage 0 |
|||
| Adhesive tape | SAGER black, 60 mm | SAGER blue, 60 mm | |||
| Fasteners Console | SAGER long shank dowel (masonry) 10 x 80 mm 1 piece / console |
SAGER concrete anchor 8 x 70 mm 1 piece / console |
|||
| Insulation fasteners | SAGER insulation holder for the 1st layer DH-one-piece 3 pcs. / m2 |
||||
| Battens | 60 x 60 mm | ||||
The SAGER FS-PRO light façade system offers the optimum substructure solution for rear-ventilated façades.
The PRO light bracket is suitable for lightweight façade cladding up to 12 kg/m2 designed.
The thermal bridge-free bracket serves as the basis for outstanding U-values and is specially designed for timber construction. Thanks to the bracket head, a 60/60 mm wooden batten can be used in the outer insulation layer. The façade membrane and the rear ventilation battens can be easily attached.
The first insulation layer is fixed with the SAGER insulation holder. We recommend 5 insulation holders per square metre.
The second, outer insulation layer is always 60 mm thick and can simply be laid between the 60/60 mm wooden battens. Based on the bracket division, the insulation can be ordered to the required width to reduce the time required and unnecessary residual material.
The SAGER sky light covering membrane is the ideal façade membrane for closed façade cladding.
The SAGER facade membrane facade, black and UV-stable, can be used for open facade cladding with a maximum 40% joint ratio and a maximum joint opening of 50 mm.
Both sheets are available in two widths, 1.5 m and 3.0 m. Thanks to the integrated self-adhesive strip, the overlaps can be glued quickly and easily.
The low-cost façade system for efficient heat separation.
SAGER FS-PRO Compact façade system
Thermal bridge-free bracket
| Consoles | Type FS-PRO Compact aluminium-fibreglass Thermal bridge-free 160 - 280 mm | ||||
|---|---|---|---|---|---|
| Insulation | SAGLAN (030) FA 50 λ 0.030 W/mK, 48 kg/m3 |
SAGLAN (032) FA 40 λ 0.032 W/mK, 38 kg/m3 |
SAGLAN (032) FA Light λ 0.032 W/mK, 30 kg/m3 |
||
| Wind seal | WALL 180 pre-plastered | WALL 180 | |||
| Fasteners Console | SAGER long shank dowel (masonry) 10 x 80 mm 1 piece / console |
SAGER concrete anchor 8 x 70 mm 1 piece / console |
|||
| Insulation fasteners | SAGER insulation holder for the 1st layer DH-one-piece 3 pcs. / m2 |
||||
| Battens | 60 x 60 mm | ||||
The low-cost façade system for efficient heat separation.
The SAGER FS-PRO COMPACT façade system offers a weather and weather-independent solution for compact façades.
The thermal bridge-free bracket serves as the basis for outstanding U-values and is specially designed for timber construction. Thanks to the bracket head, a 60/60 mm wooden batten can be used in the outer insulation layer. As façade cladding, the WALL 180 is mounted upright on the wooden battens.
The first insulation layer is fixed with the SAGER insulation holder.
The second, outer insulation layer is always 60 mm thick and can simply be fitted between the 60/60 mm wooden battens. Based on the bracket division, the insulation can be cut to the required width ex works to reduce the time required and unnecessary residual material.
The WALL 180 is mounted on the 60/60 mm wooden battens. The wood fibre insulation board can be plastered, but can also be installed with a factory-applied plaster layer. WALL 180 can be pre-plastered and exposed to the weather for up to 5 months, thus offering greater flexibility during the construction phase.
The SAGER FS-PRO COMPACT façade system offers all the advantages of the substructure with thermal bridge-free brackets. As no adhesive mortar is used for the entire façade structure up to the pre-rendered WALL 180, the system can be installed regardless of the weather.
We can advise you on your application. Get in touch with us!
